OKI LP440 Manual De Usuario

43

To print using the Bluetooth-enabled version of MB200/201i, 

you need to have a bluetooth-enabled computing device. Two 

more steps are required.
1. Check the DIP Switches:  
• The printer’s DIP switches are factory set for 

bluetooth operation. Check that Dip switch 1 is OFF and 

Dip switch 2 is ON. This is the main setting for Bluetooth 

operation. In case you need to reset other switches, refer 

to the full DIP-Switch table in the next chapter, Interface 

Specifications.

2. Synchronize Bluetooth settings
• After setting the DIP-switches, the next step is to ensure 

that both bluetooth devices are configured to operate with 

the same PIN code and Authentication mode settings. 

Refer to the instruction manual of the computing device for 

details on how to set these parameters. 

Note: When printing with the Bluetooth interface, the usable 

range between the printer and the host may vary 

depending on the usage environment and the 

capabilities of the connected devices.

The Wireless LAN version of the printer has a Liquid Crystal 

Display (LCD). The screen can display the following 

information:
1 Dispense Mode Status: Manual/Auto
2 Test Print
3 Signal Strength
4 Battery Strength