OKI LP440 Manual De Usuario

46

After the proper setup and basic configuration procedures, 

you are ready to print.
1. Make sure the host computer is ready to transmit data, 

and ensure that the STATUS LED is lit. (Press the PRINT 

button to take the printer ONLINE). 

2. Start the print job from the computer.
3. When printing is finished, pinch either the left or right 

corner of the printed roll of label(s) and tear it off in the 

direction of the arrow  in the diagram below.

Note: The number of sheets you can print is determined by 

the printer’s mode (continuous or peel mode).

When you are printing non-separate labels and you 

have torn the labels at a wrong place, stop the printing 

and follow the instructions on the next page to correct 

the print job.