Metra Electronics 99-7954 Manual De Usuario

Kit Assembly 99-7954

6

1. Locate the factory wiring harness in

the dash. Metra recommends using

the proper mating adapter from Metra

or AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Cut and remove the center bar from the

radio housing. (Figure A)

3. Snap the Double DIN brackets to the

inside edge of the radio housing.

(Figure B)

4. Slide the Double DIN radio into the

bracket/trim plate assembly and secure

the radio to the assembly using the

screws supplied with the radio.

(Figure C)

5. Snap the Double DIN trim plate into the

radio housing. (Figure C)

6. Reassemble dash in reverse order

of disassembly.

Double DIN radio provision

(Figure A)

(Figure B)

(Figure C)