Citizen CT-S310II Manual De Usuario
— 37 —
Note:
*: EPSON is a registered trademark of Seiko Epson Corporation.
Individual setting mode
Set the memory switches individually.
Do the settings while confirming the memory switch function and settings on
the printout.
Do the settings while confirming the memory switch function and settings on
the printout.
1.
Load paper.
2.
While the paper cover is open, press and hold the FEED button while turning the
power on.
power on.
3.
Press the FEED button twice and close the paper cover.
The printer enters the mode for setting memory switches individually.
The printer prints “Memory SW (1)” and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 10 are not printed.)
The printer enters the mode for setting memory switches individually.
The printer prints “Memory SW (1)” and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 10 are not printed.)
4.
Press the FEED button.
The list of memory switches cycles through in order from “Memory SW (1)”
The list of memory switches cycles through in order from “Memory SW (1)”
→
“Memory SW (2)”
→ ... “Memory SW (10)” → “Save To Memory” → “Memory SW
(1)”
→ each time the FEED button is pressed.
Press the FEED button until the number for the memory switch you want to change is
printed.
printed.
Selected item
Automatic memory switch settings
Model
Paper
width
Character
space
MSW2-4
Full Col
Print
MSW3-7
CBM1000
Mode
MSW8-1
Print
Width
MSW6-2
Character
Space
CITIZEN CT-S310
58 mm
—
WaitData
Invalid
384 dots
—
80 mm
—
WaitData
Invalid
576 dots
—
EPSON T88*
58 mm
Invalid
WaitData
Invalid
360 dots
0 dot
Valid
WaitData
Invalid
390 dots
1 dot
80 mm
Invalid
WaitData
Invalid
512 dots
0 dot
Valid
WaitData
Invalid
546 dots
1 dot
EPSON 203dpi*
58 mm
—
WaitData
Invalid
420 dots
—
80 mm
—
WaitData
Invalid
576 dots
0 dot
Current memory switch
Current setting