Citizen CT-S310II Manual De Usuario
— 40 —
Notes: Precautions regarding memory switch settings
*1: MSW2-3
*1: MSW2-3
If the spacing expands because print feed stops during printing because transfer of print data is
slow, a white streak may appear at the point that the first point it stops. It is possible to avoid the
white streak by enabling MSW2-3 to improve print quality. However, it will take a little longer for
printing to start.
slow, a white streak may appear at the point that the first point it stops. It is possible to avoid the
white streak by enabling MSW2-3 to improve print quality. However, it will take a little longer for
printing to start.
*2: MSW8-5
If reduce character size horizontally is selected, the print range and distance between lines are
also reduced. When printing on narrow paper, create print data so the print area does not extend
beyond the edge of the paper.
also reduced. When printing on narrow paper, create print data so the print area does not extend
beyond the edge of the paper.
Switch no.
Function
Initial setting
Setting value
MSW7-1
Baud Rate
9600 bps
1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps, 57600 bps, 115200 bps
19200 bps, 38400 bps, 57600 bps, 115200 bps
MSW7-2
Data Length
8bits
7bits, 8bits
MSW7-3
Stop Bit
1bit
1bit, 2bits
MSW7-4
Parity
NONE
NONE, EVEN, ODD
MSW7-5
Flow Control
DTR/DSR
DTR/DSR, XON/XOFF
MSW7-6
DMA Control
Valid
Invalid, Valid
MSW7-7
VCom Protocol
PC Setting
PC Setting, DTR/DSR, XON/XOFF
MSW8-1
Print Width
576 dots
360 dots, 384 dots, 420 dots, 512 dots,
576 dots, 390 dots, 546 dots
576 dots, 390 dots, 546 dots
MSW8-2
Reserved
MSW8-3
Top Margin
11 mm
11 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm,
8 mm, 9 mm, 10 mm
8 mm, 9 mm, 10 mm
MSW8-4
Line Gap Reduction
Invalid
Invalid, 3/4, 2/3, 1/2, 1/3, 1/4, 1/5, ALL
*2
MSW8-5
Reduce Char. V/H
100%/100%
100%/100%, 75%/100%, 50%/100%,
100%/75%, 75%/75%, 50%/75%
100%/75%, 75%/75%, 50%/75%
MSW8-6
Auto Side Shift
Invalid
Invalid, 1 dot, 2 dots, 3 dots, 4 dots, 5 dots,
6 dots, 7 dots
6 dots, 7 dots
MSW9-1
Code Page
PC 437
PC 437, Katakana, PC 850,858, PC 860,
PC 863, PC 865, PC 852, PC 866, PC 857,
WPC1252, Space, PC 864, Thai Code 18
PC 863, PC 865, PC 852, PC 866, PC 857,
WPC1252, Space, PC 864, Thai Code 18
MSW9-2
Int’Char Set
USA
USA, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea,
Croatia, China
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea,
Croatia, China
MSW9-3
Kanji
OFF
ON, OFF
MSW9-4
JIS/Shift JIS
JIS
JIS, Shift JIS (CP932), Shift JIS (X0213)
MSW10-1
Print Density
100 %
70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %,
105 %, 110 %, 115 %, 120 %, 125 %, 130 %,
135 %, 140 %
105 %, 110 %, 115 %, 120 %, 125 %, 130 %,
135 %, 140 %
MSW10-2
Print Speed
Level 9
Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
Level 6, Level 7, Level 8, Level 9
MSW10-3
Reserved
MSW10-4
Reserved
MSW10-5
Reserved
MSW10-6
Buzzer Event
Not by C.Open All Event/Error, Not by C.Open, C.Open/PE