Cadillac escalade ext 2002 Manual De Usuario

This feature allows you to use your high

-

beam

headlamps to signal a driver in front of you that you
want to pass. It works even if your headlamps are off.

To use it, pull the turn signal lever toward you, but not
so far that you hear it click.

If your headlamps are off or on low

-

beam, your

high

-

beam headlamps will turn on. They’ll stay on 

as long as you hold the lever toward you and the
high

-

beam indicator on the instrument panel cluster

comes on. Release the lever to turn the high

-

beam

headlamps off.

You control the windshield wipers by turning the band
with the wiper symbol on it.

For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one wipe. If you want more wipes, hold the
band on MIST longer.

You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain 
or snow. Turn the band to choose the delay time. 
The closer to LO, the shorter the delay.

For steady wiping at low speed, turn the band away
from you to the LO position. For high

-

speed wiping,

turn the band further, to HI. To stop the wipers, move
the band to the OFF position.

Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If your blades do become
worn or damaged, get new blades or blade inserts.

(Washer Fluid): There is a paddle marked 

with the windshield washer symbol at the top of the
multifunction lever. To spray washer fluid on the
windshield, push the paddle. The wipers will clear 
the window and then either stop or return to your 
preset speed.