GTO driveway exit wand Manual De Usuario
ACCESSORY
Automatically activates gate operators “Hands-Free” when a
vehicle approaches. Designed for residential, agricultural, and
commercial applications.
Easy to install. Avoid the headaches associated with installing
exit and entry loop detector systems, installs in 1/3 the time.
vehicle approaches. Designed for residential, agricultural, and
commercial applications.
Easy to install. Avoid the headaches associated with installing
exit and entry loop detector systems, installs in 1/3 the time.
DRIVEWAY WAND
SENSOR
Ideal for:
Hands free exit and
Hands free exit and
entry applications
Vehicle Detection
and notification
applications
���������������������������
���������������������������
�
We are
Professional
Access
System
Specialists...
FM139, FM140, FM141 EXIT WAND
• Direct burial wire lengths in 6 sizes: lengths (FM139) 50 ft.,
(FM140) 100 ft., (FM141) 150 ft, (FM141-250) 250 ft, (FM141-
500) 500 ft, and (FM141-1000) 1000 ft.
• Electromagnetic sensor detects vehicles-in-motion.
• Relay latch time of 2 seconds.
• Compatible with all automatic gate operators, or other systems
• Electromagnetic sensor detects vehicles-in-motion.
• Relay latch time of 2 seconds.
• Compatible with all automatic gate operators, or other systems
requiring a dry contact input device.
• Potentiometer board adjusts sensitivity from 3 to 12 foot radius
• Potentiometer board adjusts sensitivity from 3 to 12 foot radius
to accommodate many applications and situations.
• Ideal for solar application, 1.5 mA current consumption.
• Wide input voltage range (8-32 vAC or 8-26 vDC).
• Designed to reject line noise of 50Hz or 60Hz; improves
• Ideal for solar application, 1.5 mA current consumption.
• Wide input voltage range (8-32 vAC or 8-26 vDC).
• Designed to reject line noise of 50Hz or 60Hz; improves
detection capability near power lines and avoids crosstalk
frequency issues.
• Dimensions: 1.75” (44.5 mm) diameter x 16.75” (425.4mm)
• Dimensions: 1.75” (44.5 mm) diameter x 16.75” (425.4mm)
long.
• May not be used as a safety device.
• No drive over loads to get damaged or fail, common with loop
• May not be used as a safety device.
• No drive over loads to get damaged or fail, common with loop
detector systems.
GTO, Inc.® and GTO/PRO® are registered trademarks of GTO, Inc. © 2005, Rev. 3/05