Morphy Richards ib40621 Manual De Usuario

To keep the soleplate of your iron clean

and free of limescale, we recommend that
you use one of the gentle chrome, silver or
stainless steel cleaners that are generally
available. Always follow the manufacturers
instructions. To clean off melted man-made
fibres set the iron at 3 dot position and pass
it over a clean piece of cotton which will draw
the deposit off the surface.

In the unlikely event of any man-made

fibre fusing to the soleplate, set the iron at
the 3 dot position and pass it over a clean
piece of cotton which will draw the deposit
off the surface.

Do not use scouring powder or solution as

this could cause damage to the coating.

Allow the iron to cool and wipe over with a

damp cloth and mild detergent, then wipe
with a dry cloth.

When you have

finished ironing,
unplug your iron.
Ensure that the
variable steam control
is set at the ‘0’
position, lift up the fill
cap and empty any
remaining water out
of the filling hole.

Do not store in the box, but in an upright

position, so that any drops of water
remaining cannot leak out and discolour the
soleplate.

Important: The flex can be

damaged if wound too tightly
around the iron after use.
Make a loose loop with the
flex and wrap it around the
iron. The iron must be cool
before winding the flex and
storing on its heel.

If you have any difficulty with your 

appliance, do not hesitate to call us.

We are more likely able to help than the 

store from where you bought it.

Please have the following information 

ready to enable our staff to deal with your 
query quickly.

• Name of the product
• Model number as shown on the underside

of the appliance.

digital iron RN40621M Rev 1  14/3/03  5:14 AM  Page 8