Citrix Systems switch 4 Manual De Usuario

Steps to Add a New Zone

53

• Start/End Reserved System IP. The IP range in the management network that CloudPlatform

uses to manage various system VMs, such as Secondary Storage VMs, Console Proxy VMs,
and DHCP. For more information, see 

.

7.

Specify a range of VLAN IDs to carry guest traffic for each physical network (see VLAN Allocation
Example ), then click Next.

8.

In a new pod, CloudPlatform adds the first cluster for you. You can always add more clusters later.
For an overview of what a cluster is, see 

To configure the first cluster, enter the following, then click Next:

• Hypervisor. The type of hypervisor software that all hosts in this cluster will run. If the

hypervisor is VMware, additional fields appear so you can give information about a vSphere
cluster. For vSphere servers, we recommend creating the cluster of hosts in vCenter and then
adding the entire cluster to CloudPlatform. See 

.

• Cluster name. Enter a name for the cluster. This can be text of your choosing and is not used

by CloudPlatform.

9.

In a new cluster, CloudPlatform adds the first host for you. You can always add more hosts later.
For an overview of what a host is, see 

When you deploy CloudPlatform, the hypervisor host must not have any VMs already
running.

Before you can configure the host, you need to install the hypervisor software on the host. You will
need to know which version of the hypervisor software version is supported by CloudPlatform and
what additional configuration is required to ensure the host will work with CloudPlatform. To find
these installation details, see:

• Citrix XenServer Installation for CloudPlatform

• VMware vSphere Installation and Configuration

• KVM Installation and Configuration

• Oracle VM (OVM) Installation and Configuration

To configure the first host, enter the following, then click Next:

• Host Name. The DNS name or IP address of the host.

• Username. Usually root.

• Password. This is the password for the user named above (from your XenServer or KVM

install).

• Host Tags. (Optional) Any labels that you use to categorize hosts for ease of maintenance. For

example, you can set to the cloud's HA tag (set in the ha.tag global configuration parameter)
if you want this host to be used only for VMs with the "high availability" feature enabled. For