OKI office 84 Manual De Usuario
Handbook
|
33
3 Your MFP grips the documents, and pulls the bottom page
into the machine.
If necessary, use the Transmit Resolution or Yes
§ key to
set the resolution of your document.
Document Type
Resolution
Resolution
To Use
of Scan
Normal office
STD (Standard)
200 x 100 dpi
documents
Documents with small
FINE or EX.FINE
FINE: 200 x 200 dpi
type or other fine details
EX. FINE 200 x 400 dpi
Documents with photos PHOTO
300 x 300 dpi
or many shades of gray
4 If necessary, use the Type of Original/No
© key to set the
level of contrast in your document.
Document Type
Contrast to Use
Documents with normal contrast
NORMAL
(default setting)
Documents that are too light
LIGHT
Documents that are too dark
DARK
5 Your Documents are now ready for faxing or copying.
Sending a Fax to a Single Location
1 Load your documents.
2 Select a location. Refer to the instructions below.
To Dial Using
Do This
A One Touch key
Press the One Touch key.
An Auto Dial number
Press the Auto Dial key, then enter
the two digit Auto Dial numbers
on the numeric keypad.
the two digit Auto Dial numbers
on the numeric keypad.
The numeric keypad
Dial as you would on a normal
telephone. If you make a mistake,
press theYes
telephone. If you make a mistake,
press theYes
§ key back up one
space and re-enter the number.
An external telephone
Pick up the handset of your
external telephone and dial the
number of the machine you wish
to transmit to. If the receiving fax
machine is in automatic reception
mode, you will hear a high-pitched
tone. If a person answers the
phone, ask them to press the Start
key on their fax machine.
external telephone and dial the
number of the machine you wish
to transmit to. If the receiving fax
machine is in automatic reception
mode, you will hear a high-pitched
tone. If a person answers the
phone, ask them to press the Start
key on their fax machine.
3 If necessary, press the Start key to begin the transmission.