OKI office 84 Manual De Usuario

|

Handbook

Enter the Location ID. This is a descriptive title up to 15
characters long. Refer to the instructions below.

Enter numbers

Numeric keypad (press once)

Enter spaces

Space One Touch key

Enter Hyphens (-)

Hyphen  key

Enter alphabet characters

Locate the character you
want on thenumeric keypad.
Press that key repeatedly
until the desired character
appears.

Enter a unique character

Press the 0/Unique key
repeatedly until the
character you want appears.
The following characters are
available: ! # & ‘ ( ) * +
, - . / : ; = ? 

⋅

 ä ß ñ ö ü Æ

Å Ø æ å ø.

Enter two letters using the

Press the No 

© key to

same key.

move to the next position.

Move the cursor to make

Press the Yes 

§ and No ©

corrections.

keys.

Press the Start key. The display shows NO=<OR
LOCATION>.

Enter the alternate fax number. Refer to the instructions
following Step 5.

10 Press the Start key to finish programming the One Touch

key. The display shows  

LOCATION PROGRAMMING.

11 To continue programming One Touch keys, go back to

Step 3. If you are finished programming, press the Select
Function key.

12 Lift off the plastic cover above the One Touch label.

Using a pencil, write in the name for your newly-
programmed One Touch key. Then replace the cover.

If you are experiencing problems communicating with a
remote location in a very noisy telephone area, or an overseas
location, set up a One Touch key for that location and try
turning Echo Protection on for that One Touch key.

Press the Select Function key.

Press the 9/User Program One Touch key. The display
shows  

1:FUNC. PROGRAMMING.

Press the Yes 

§ key. The display will show  FUNCTION

NO. [   ].