Honeywell HRXD9 Manual De Usuario

Configuration

40

2.

Highlight the Site box and press 

. A virtual keyboard appears that you can use 

to enter a Site Name.

3.

Once you have entered your title, highlight OK and press 

.

4.

Highlight the box beside System ID and press 

. Change the number by 

highlighting it and using the Up and Down arrow buttons to increase and 
decrease the number from 0 to 99.

The System ID number is used to identify the unit when it is 
connected with other DVRs through the RS485 port. You cannot 
use the same ID number for two or more DVRs that are in the 
same RS485 network. It is possible to have multiple DVRs with 
System ID 0 that are in the same area as long as they are not 
part of an RS485 network. If this is the case, all will be controlled 
at the same time when using the infrared remote control.

5.

Highlight the box beside Language and press 

. A drop-down menu displays 

the available languages. Highlight the desired language and press 

.

6.

The box beside Version displays the software version of the DVR. To upgrade the 
software:

a.

Connect a USB device containing the upgrade package file to the DVR.

b.

Highlight Upgrade… and press 

. The Upgrade screen appears. The 

screen displays the upgrade package file names that are available. The .rui 
indicates that the file is for software upgrades.

c.

Select the desired file and press 

.

d.

Highlighting Install and pressing 

 will install the selected software 

package. Highlighting Cancel and pressing 

 will close the window without 

upgrading the software.

If the upgrade package file is not installed on the DVR properly, you will get 
an error message.

e.

The system restarts automatically after completing the upgrade.

Upgrade will be deactivated if the hard disk drive has not been 
formatted as it requires the space for temporary files when 
upgrading the system.