ICOM ic-m3euro Manual De Usuario
10
5
SCAN OPERATION
■ Scan types
Scanning is an efficient way to locate signals quickly over a
wide frequency range. The transceiver has a priority scan and
a normal scan.
wide frequency range. The transceiver has a priority scan and
a normal scan.
Set the tag channels (channels to be scanned) before scan-
ning. Clear the tag channels which inconveniently stop scan-
ning, such as those used for digital communications.
ning. Clear the tag channels which inconveniently stop scan-
ning, such as those used for digital communications.
NOTE: Choose priority or normal scan in SET mode. (p. 12)
PRIORITY SCAN
Priority scan searches through all tag channels in se-
quence while monitoring channel 16. When a signal is de-
tected on channel 16, scan pauses until the signal
disappears; when a signal is detected on a channel other
than channel 16, scan becomes dualwatch until the signal
disappears.
quence while monitoring channel 16. When a signal is de-
tected on channel 16, scan pauses until the signal
disappears; when a signal is detected on a channel other
than channel 16, scan becomes dualwatch until the signal
disappears.
WX*
CH 01
CH 16
CH 02
CH 05
CH 04
CH 03
NORMAL SCAN
Normal scan, like priority scan, searches through all tag
channels in sequence. However, unlike priority scan, chan-
nel 16 is not checked unless channel 16 is set as a tag
channel.
channels in sequence. However, unlike priority scan, chan-
nel 16 is not checked unless channel 16 is set as a tag
channel.
CH 01
CH 02
WX*
CH 05
CH 04
CH 03
IC-M3EURO-(2) 02.3.11 5:09 PM Page 10 (1,1)