ICOM IC-F610
17
3
BIIS OPERATION
New2001
■ Transmitting a status
D
D General
The status message can be selected with the programmed
text, and the message text is also displayed on the function
display of the called station.
Up to 24 status types (1 to 24) are available, and the status
message 19, 22, 23 and 24 have designated meanings.
text, and the message text is also displayed on the function
display of the called station.
Up to 24 status types (1 to 24) are available, and the status
message 19, 22, 23 and 24 have designated meanings.
Status 19: Power OFF*
Status 22: Emergency
Status 23: Power ON*
Status 24: GPS request
Status 22: Emergency
Status 23: Power ON*
Status 24: GPS request
*The status 19 and 23 can also be used as normal status mes-
sages by disabling the designated meaning. However, status 22
and 24 are fixed.
and 24 are fixed.
The status call can be sent with both individual and group
calls.
calls.
D
D Select a status from status memory
q During standby condition, push [DIGITAL (P1)], then push
[
]/[
] to select the desired station/group code.
w Push [DIGITAL (P1)] again, then push [
]/[
] to select
the desired status message.
Or, push [Y] or [Z] to select the desired status message.
Or, push [Y] or [Z] to select the desired status message.
• When the optional DTMF microphone is used, pushing [
✱]/[#] re-
turns the transceiver to standby condition.
e Push [CALL (P0)] or [PTT]* to transmit the status message
to the selected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
For your information
When the optional DTMF microphone is used, pushing [1]–[9]
selects the status message 1–9, and pushing [0] selects the
status message 10, respectively, even during standby condi-
tion.
When the optional DTMF microphone is used, pushing [1]–[9]
selects the status message 1–9, and pushing [0] selects the
status message 10, respectively, even during standby condi-
tion.
Status message is displayed.
IC-F510 Series_BIIS-2.qxd 06.7.13 1:31 PM Page 17 (1,1)