GE PT878GC Manual De Usuario
April 2004
8-2
Logging Data
Entering the Logging Menu
To enter the Logging Menu, press the
[MENU]
key at the lower
right of the PT878GC keypad. The Main Menu replaces the
Status Bar at the top of the screen. Press the [
Status Bar at the top of the screen. Press the [
X
] arrow key three
times to scroll from the Site Menu to the Logging Menu. At the
Logging Menu, press
Logging Menu, press
[ENTER]
. The screen appears similar to
Figure 8-1 below. Refer to Figure A-9 on page A-9 of Appendix
A, Menu Maps.
A, Menu Maps.
Figure 8-1: The Logging Menu
To scroll to a particular option, press the [
T
] or [
S
] arrow keys
until you reach the option. Then press
[ENTER]
to open the option
window.
When entering parameters in an option, press:
•
The [T ] key to step through the available parameters
•
The [S] key to scroll back to a previously entered parameter
•
The
[F2]
key (Cancel) or the
[ESC]
key to exit an option at any
time and return to Operate Mode without changing the
parameters.
parameters.
Velocity, ft/s
Signal, dB
0.00
32
Delta-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Site Program Meter
Logging
Service
Units
Manager
New Log
Test