GE PT878GC Manual De Usuario
April 2004
8-10
Logging Data
Copying (Cloning) a Selected Log
In the Clone Selected Log option, you can copy the parameters of
a particular log, modify the parameters, and start the copy. To
copy a log:
a particular log, modify the parameters, and start the copy. To
copy a log:
1. First, select the log you wish to copy in the Log Manager
(shown in Figure 8-3 on page 8-4).
2. Then open the File menu, scroll to the Clone Selected Log
option, and press
[ENTER]
.
3. The Create New Log window (shown in Figure 8-4 on page
8-6) opens. Follow the procedure discussed on page 8-5 to
create a log name, and press
create a log name, and press
[F3]
(OK) to confirm the name.
4. The General Log Format window (shown in Figure 8-5 on
page 8-7) opens. Follow the procedure discussed on pages 8-7
and 8-8 to change any settings.
and 8-8 to change any settings.
Note: Unless otherwise specified, the cloned log always begins
at the current date and time, and ends after the period of
time used by the original log.
time used by the original log.
5. If you wish, scroll to the Measurements window (shown in
Figure 8-6 on page 8-8) and follow the procedure discussed on
pages 8-8 and 8-9 to modify any parameters.
pages 8-8 and 8-9 to modify any parameters.
6. When you have completed modifying the log parameters,
press
[F2]
(Cancel) to cancel the log or
[F3]
(Activate) to
confirm and start the new log.
The PT878GC returns to the Log Manager, which now displays
the status of the cloned log.
the status of the cloned log.
Note: Some changes in the site file could prevent log cloning.