Garmin g1000 beechcraftbaron58 g58 pilots guide Manual De Usuario
190-00629-00 Rev. B
Garmin G1000 Pilot’s Guide for Beechcraft 58/G58
2-23
PRIMARY FLIGHT DISPLAY
2.6 SUPPLEMENTAL FLIGHT DATA
OUTSIDE AIR TEMPERATURE BOX
The outside air temperature (OAT) is displayed in
°C. On the MFD AUX System Setup Page, OAT can be
configured to be displayed in °F instead of °C (refer to the
Multi Function Display section).
configured to be displayed in °F instead of °C (refer to the
Multi Function Display section).
Figure 2-40 Outside Air Temperature Box
SYSTEM TIME BOX
The System Time Box displays the local time. Time and
date is obtained from the satellites and cannot be changed.
The pilot may select the desired time format and offset.
There are three time formats available: Local 12 hr, Local
24 hr, and Coordinated Universal Time (UTC). The Time
Offset (Time Zone) represents the number of hours plus or
minus UTC (refer to the Multi Function Display section).
The pilot may select the desired time format and offset.
There are three time formats available: Local 12 hr, Local
24 hr, and Coordinated Universal Time (UTC). The Time
Offset (Time Zone) represents the number of hours plus or
minus UTC (refer to the Multi Function Display section).
Figure 2-41 System Time Box
INSET MAP
NOTE: The Inset Map orientation is always
the same as that for the MFD Navigation Map
Page.
the same as that for the MFD Navigation Map
Page.
NOTE: Map orientation and other map features
are enabled on the MFD (refer to the Multi
Function Display section).
are enabled on the MFD (refer to the Multi
Function Display section).
NOTE: Refer to the Multi Function Display
section for a detailed explanation of the declutter
levels.
levels.
The Inset Map is a smaller version of the MFD
Navigation Map Page. It appears in the lower left corner
of the PFD and is displayed by pressing the INSET softkey.
The map disappears from the PFD when pitch exceeds
+30° or –20° or when a 65° bank angle is reached. The
direct-to function is not available from the Inset Map. The
fuel reserve rings are enabled and disabled from the MFD
only. The Inset Map displays the following information:
of the PFD and is displayed by pressing the INSET softkey.
The map disappears from the PFD when pitch exceeds
+30° or –20° or when a 65° bank angle is reached. The
direct-to function is not available from the Inset Map. The
fuel reserve rings are enabled and disabled from the MFD
only. The Inset Map displays the following information:
• Moving map with orientation references
– North Up
– Track Up
– DTK Up
– HDG Up
• Zoom range legend
• Declutter levels (3)
• Aircraft icon
• Traffic data
• Topographic data
• Terrain data
• Weather information (optional)
• Enabled map features
• Active navigation route
• Track vector
• Fuel ring (reserve)
– North Up
– Track Up
– DTK Up
– HDG Up
• Zoom range legend
• Declutter levels (3)
• Aircraft icon
• Traffic data
• Topographic data
• Terrain data
• Weather information (optional)
• Enabled map features
• Active navigation route
• Track vector
• Fuel ring (reserve)