ICOM ic-m34 Manual De Usuario

10

4

BASIC OPERATION

■ Receiving and transmitting

CAUTION: Transmitting without an antenna will damage
the transceiver.

q Push and hold [PWR] to turn power ON.
w Set the audio and squelch levels.

➥ Push [SQL], and push [Z

Z] several times to open the squelch.

➥ Push [VOL], then push [Y

Y]/[Z

Z] to adjust the volume level.

➥ Push [SQL], and push [Y

Y] until the noise disappears.

e Push [Y

Y]/[Z

Z] to select the desired channel.

• When receiving a signal, “

” appears and audio is emitted

from the speaker.

• Further adjustment of the audio may be necessary at this point.

r Push [H/L] to select the output power if necessary.

• “LOW” appears when low power is selected; no indication when

high power is selected.

• Choose low power to conserve battery power, choose high

power for longer distance communications.

• Some channels are for low power only.

t Push and hold [PTT] to transmit, then speak into the

microphone.

• “

” appears.

• Channel 70 cannot be used for transmission.

y Release [PTT] to receive.

IMPORTANT: To maximize the readability of your trans-
mitted signal, pause a few sec. after pushing [PTT], hold
the microphone 2 to 4 inches (5 to 10 cm) from your mouth
and speak into the microphone at a normal voice level.

NOTE: The transceiver has a power save function to con-
serve the battery power. The power save function activates
automatically when no signal is received for 5 sec.

For U.S.A version: To prevent accidental prolonged trans-
mission, etc., the IC-M34 has a time-out timer function.
This timer cuts a transmission OFF after 5 min. of continu-
ous transmission.

Microphone

r Set output 
     power

q Power ON

w Set the 

squelch level

w Set volume

t Push to
     transmit
y Release to
     receive

e Set channel

Set the squelch 
and volume level.

w