HP 518859-B21 Manual De Usuario

Integrated Models section for more information.

Internal Drive Support

Internal Drive Support:

Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives

Network Controller

Network Controller:

One (1) integrated NC551i Dual Port FlexFabric 10Gb Converged Network Adapter supporting stateless TCP/IP
offload, TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI protocols

NOTE:

NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn more at:

www.hp.com/go/virtualconnect

NOTE:

NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10GB/24-
port Module or HP 10GbE Pass-Thru Module.
NOTE:

NOTE:

NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect
components. Both ports will operate at the same speed.

One (1) additional embedded 10/100 network adapter dedicated to iLO 3 management

Mezzanine Support

Mezzanine Support:

Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards

Dual-Port FlexFabric Adapter mezzanine option
Dual-Port Fibre Channel Mezzanine (4-Gb or 8-Gb) options for SAN connectivity
Dual-Port FlexFabric Converged Network Adapter
Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) Mezzanine options for low latency server interconnectivity
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage

Expansion Blade Support

Expansion Blade Support:

Supports one (1) optional storage, tape, or PCI expansion blade

Internal Media Support

Internal Media Support:

One (1) internal USB 2.0 connector for security key devices and USB drive key
One (1) internal Micro SD-HC card slot

Trusted Platform Module

Trusted Platform Module:

One (1) internal TPM 1.2 module connector

Form Factor

Form Factor:

HP ProLiant BL465c G7 server blade plugs into the BladeSystem c3000 and c7000 enclosures

Infrastructure Management

Infrastructure Management:

This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at

http://h18004.www1.hp.com/products/blades/components/c-class-

compmatrix.html

HP Integrated Lights-Out 3 management processor for simplified server setup, health monitoring and recovery, power
and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money
by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple
management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to
continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data
center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's
changing business requirements.

Operating Systems and Virtualization Software

Operating Systems and Virtualization Software:

Supports Windows, RHEL, SLES, VMware,, Citrix XenServer

Enclosures

Enclosures:

HP offers two (2) different c-Class server blade enclosures to meet your individual needs:

The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL465c G7 servers
plugged vertically.

QuickSpecs

HP ProLiant BL465c Generation 7 (G7) Server Blade

Overview

DA - 13654 North America — Version 18 — November 14, 2011

Page 3