GE 28320 Manual De Usuario

No dial tone
•  Check and repeat installation steps:
  Ensure the base power cord is connected to a working electrical outlet .
  Ensure the telephone line cord is connected to the base and the wall jack.
•  Connect another phone to the same jack; if there is still no dial tone, the problem 

might be your wiring or local service.

•  The handset may be out of range of the base. Move closer to the base.
•  Ensure the batteries are installed correctly.
Cannot dial
•  Keypad may be locked. If the Padlock icon is on, press unlock in order to deactivate 

and enable the keypad.

No signal icon
•  The handset may be out of range of the base. Move closer to the base.
•  Register handset.
Handset does not ring  
•  Make sure the handset ringer switch is turned ON, this can be done through the 

handset setup menu - Sounds - Ring Volume.

•  The handset may be out of range. Move closer to the base.
•  You may have too many extension phones on your line. Try unplugging some 

phones.

•  Check for dial tone. 
No sound from handset 
•  Adjust handset volume.
•  Check and adjust sound settings.
You experience static, noise, or fading in and out
•  The handset may be out of range of the base. Move closer to the base.
•  Make sure base is not plugged into an outlet with another household appliance. If 

necessary, relocate the base.