Garmin actionlaser 1600 Manual De Usuario

To print a status sheet:

1. Make sure the imaging cartridge is installed. Turn on the

printer. Several messages appear as the printer performs

internal tests. After about 35 seconds, the READY message

appears in the printer’s control panel.

2. Press the Menu button to enter SelecType.

™

3. Press the Menu button several times until TEST MENU

appears on the display.

4. Press the Item button; you should see STATUS SHEET on

the display.

5. Press the Enter button. The printer prints the status sheet,

showing the current printer settings.

6. Press the On Line button to put the printer back on line.

Connecting the printer to the

computer

The printer comes equipped with a parallel and serial interface.

This section gives instructions for installing both interfaces. If

you install an optional interface, see Appendix C of the

Reference Guide for more information.

Note:

If you are connecting more than one computer to the printer, see

“Sharing the Printer” at the end of Chapter 1 in the Reference

Guide.

1. Make sure both the printer and the computer are off.