Olympus LS-11 Manual De Usuario

Ab

ou

t R

ec

ord

ing

L

R

Key map

When recording with the 

built-in microphone:

Turn the microphone in the direction 

of the source to be recorded.

About Recording

Before Recording

Getting Ready

Affix the windscreen:

Start recording after attach the 

windscreen (included within) to 

the microphone. The noise may 

occur even if a windscreen is at-

tached when forcing wind blows 

against a microphone.

Turn the Microphone Toward the Original Sound Source

Select the media for recording:

The built-in flash memory as well as an SD 

Card can be used (☞ P.17, P.41, P.46).

Select the recording format:

Recording  can  be  performed  through  the 

linear PCM format, as well as the WAV, MP3 

and WMA formats (☞ P.41, P.43).

Turn the built-in stereo microphone in the direction that you would like to record. Placing the built-in stereo 

microphone over the display is the proper position for performing stereo recording. If it is below the display 

when recording then proper stereo recording cannot be performed because the position of the original 

sound will be recorded in reverse phase.

On mounting:

Accurate  adjustments  of  the  microphone’s  angle  and 

the  like  can  be  made  when  the  device  is  affixed  to  a 

commercially available tripod used for cameras.

About the built-in stereo microphone:

The direction of capturing sound by the microphone 

can be changed with the MIC SENSE HIGH/LOW switch 

(☞ P.27).