ZyXEL Communications G-162 Manual De Usuario

Descargar
Página de 65
ZyXEL G-162 User’s Guide 
2-2                                                             
 
Wireless LAN Network 
Your ZyXEL G-162 (in infrastructure mode) can transmit at the proprietary 
transmission rates of 22Mbps or 125 Mbps if you are connecting to the ZyXEL G-
560.
3
 
2.1.4 Wireless Network Application 
Wireless LAN works in either of the two modes: ad-hoc and infrastructure. 
To connect to a wired network within a coverage area using Access Points (APs), set the ZyXEL G-162 
operation mode to Infrastructure (BSS). An AP acts as a bridge between the wireless stations and the 
wired network.  In case you do not wish to connect to a wired network, but prefer to set up a small 
independent wireless workgroup without an AP, use the Ad-hoc (IBSS) (Independent Basic Service Set) 
mode. 
Ad-Hoc (IBSS)  
Ad-hoc mode does not require an AP or a wired network. Two or more wireless stations communicate 
directly to each other. An ad-hoc network may sometimes be referred to as an Independent Basic Service 
Set (IBSS). 
 
Figure 2-1 IBSS Example 
To set up an ad-hoc network, configure all wireless stations in ad-hoc network 
type and use the same SSID and channel. 
Infrastructure (BSS) 
When a number of wireless stations are connected using a single AP, you have a Basic Service Set (BSS). 
                                                           
3
 At the time of writing, the proprietary transmission rate is only available for ZyXEL G-162, G-360 and G-
560.