Mitsubishi diamond pro 91txm Manual De Usuario

15

See Figure 6 and 7 for the location of the following user controls and indicators.

Each control is identified by number and  is described individually on each page.

[How to use the front control panel]
Press the button marked “

” on

the control panel to open.To close,
press it again.

Figure 6

1.

POWER SWITCH: A push-on push-off switch for AC power.

2.

POWER-ON INDICATOR: This indicator illuminates when AC power is on.

3.

RESET BUTTON:  Push the RESET button to restore a factory preset that has been modified
by the user.  This button performs two functions under different conditions.

1.

When adjusting H-SIZE, H-PHASE, V-SIZE, V-PHASE, PCC-AMP or PCC-PHASE
controls, pressing the RESET button will restore the factory adjusted screen geometry and
size settings, if the current video signal timing corresponds to a factory preset timing.

2.

When adjusting color gains, pressing the RESET button will restore the factory adjusted
color gain for the currently selected color memory number.

4.

INPUT CONNECTOR SELECT BUTTON:  Push the BNC/D-SUB button to select the input
signal BNC or D-SUB.  By the OSD function, input signal could select, either.  (See 4.1 (3)
Connector select)

5.

FUNCTION SELECT BUTTONS:  Push the adjust buttons to choose one of the functions that
is superimposed on the display screen.

6.

FUNCTION ADJUST BUTTONS: Push the adjust buttons to adjust the image on the screen
that is selected via the function select buttons.

7.

DEGAUSS BUTTON: A push type button that is used to eliminate possible color shading or
impurity.

RESET         BNC/D-SUB

RESET         BNC/D-SUB

ADJUST                   DEGAUSS

ADJUST                   DEGAUSS

SELECT

SELECT