Mitsubishi diamond pro 91txm Manual De Usuario

4.1

Normal Mode Operation

Press any select button and control indicators will be superimposed on the display screen.
Refer to Figure 6 for the location of the monitor function ( ) controls. Press
the select buttons to choose one of the following controls.
When the indicator of a function symbol comes on the screen and changes to blue, that control is
active and can be adjusted by the adjust buttons. The monitor automatically memorizes all
adjustments.
If you don't touch the control switches for ten seconds, the OSD screen will disappear.
For faster OSD blanking, push buttons simultaneously.

Press the Plus Adjust Button:

Press the Minus Adjust Button:

FUNCTION AND OSD

(3) CONNECTOR-SELECT

Press the minus adjust
button to select the D-
SUB input connector.

Press the plus adjust
button to select the BNC
input connector.

If the selected connector has no signal, the monitor
will select another one automatically.

Press plus and minus buttons together, to restore to
factory preset level.

To increase the brightness.

To decrease the brightness.

To increase the contrast.

To decrease the contrast.

Press plus and minus buttons together, to restore to
factory preset level.

(2) BRIGHTNESS

NORMAL

CONTRAST

BRIGHT

CONNECTOR

50%

(1) CONTRAST

NORMAL

CONTRAST

BRIGHT

CONNECTOR

50%

Button: select up

Button: select down

Button: select right

Button: select left

Front Control Panel

RESET BNC/D-SUB

ADJUST DEGAUSS

SELECT

D-SUB

NORMAL

CONTRAST

BRIGHT

CONNECTOR

BNC