HoMedics nmsq-200-1 Manual De Usuario

fig. 2

5

SAVE THESE INSTRUCTIONS

• This product is not intended for medical use. It is intended only to provide 

a luxurious massage.

• If you have any concerns regarding your health consult your doctor before 

using this product.

• In case of pregnancy, diabetes, pacemaker use, illness or any medical condition, 

consult your doctor before using massager.

• NEVER leave the appliance unattended, especially if children are present.
• NEVER cover the appliance when it is in operation.
• DO NOT use this product for more than 15 minutes at a time.
• Extensive use could lead to the product’s excessive heating and shorter life. 

Should this occur, discontinue use and allow the unit to cool before operating.

• NEVER use this product directly on swollen or inflamed areas or skin eruptions.
• DO NOT use this product as a substitute for medical attention.
• DO NOT use this product before bed. The massager has a stimulating effect 

and can delay sleep.

• NEVER use this product while in bed.
• This product should NEVER be used by any individual suffering from any 

physical ailment that would limit the user’s capacity to operate the controls.

• This unit should not be used by children or invalids without adult supervision.
• NEVER use this product while driving an automobile.

Battery Precautions

• Use only the size and type of batteries specified.
• When installing batteries, observe proper +/- polarities. Incorrect installation of 

batteries may cause damage to the unit.

• Do not mix different types of batteries together (e.g., alkaline with carbon-zinc 

or old batteries with new ones).

• If the unit is not going to be used for a long period of time, remove batteries to 

prevent damage due to possible battery leakage

. 

4

Instructions for Use

1.Insert adaptor plug into the control pad. (Fig. 1)

This unit incorporates a wire frame allowing you to contour the
unit to your neck. (Fig. 2)

2.Plug into a AC 120-volt outlet.
3.Place massager on your neck and mold the wire framing to

desired position. (Fig. 2)

4.To activate the massage action, press the massage button on

the control pad. (Fig. 3)

5.Press once for high speed, a second time for low, and press

again to turn the unit off.

6.To activate the heat function, with massage running, press the

heat button on the control pad. (Fig. 3) The LED illuminator will
glow red. 

7.To turn off the heat function, simply press the heat button again.

NOTE: Heat is a mild, comfortable heat.

1.Locate the zipper on the back of the unit.
2.Unzip to expose the battery compartment, remove lid. (Fig. 4)
3.Insert 4 “AA” batteries (not included). Proper battery orientation

is noted inside the battery compartment housing.

4.Replace the cover and zip the back portion back up, making

sure both zipper ends are touching each other to ensure zip-
per is closed properly.

5.To activate massage, follow steps 3 – 5 from adaptor instructions.

fig. 1

HEAT

LOW

HIGH

MASSAGE

fig. 3

fig. 4