Zoom 2020 Manual De Usuario
• Select the bank with the bank pedal.
A bank is a group of four patches. There are five banks each
(numbered 0 through 4) for the user group and the preset
group. With each push of the bank pedal, the bank number is
incremented by one. The bank number display flashes.
(numbered 0 through 4) for the user group and the preset
group. With each push of the bank pedal, the bank number is
incremented by one. The bank number display flashes.
Only pressing the BANK key does not yet change the
patch. To activate the patch and change the sound,
press one of the pedals 1 - 4, as described below.
patch. To activate the patch and change the sound,
press one of the pedals 1 - 4, as described below.
• Select the patch by pressing one of the pedals 1 - 4.
The LED of that pedal lights up, showing that the patch has
been selected.
been selected.
Adjusting the patch level
The final output level of the patch — called the patch level
— is also stored as a parameter along with the other
parameters of the patch. In the Play mode, the patch level
only can be adjusted.
— is also stored as a parameter along with the other
parameters of the patch. In the Play mode, the patch level
only can be adjusted.
• Press the VALUE + / - keys in the Play mode.
When one of the VALUE + / - keys is pressed, the current
patch level setting is shown on the display as a numeric
value (0 - 31). Pressing VALUE + increases the value and
pressing VALUE - decreases it. To change values
continuously, hold down the key. To change values more
rapidly, press the other key as well.
patch level setting is shown on the display as a numeric
value (0 - 31). Pressing VALUE + increases the value and
pressing VALUE - decreases it. To change values
continuously, hold down the key. To change values more
rapidly, press the other key as well.
• The patch level setting change made in this way is
only temporary. If you select a different patch
without storing the new level setting first, the
setting will be lost. (For details on how to store
settings, please refer to page 12.)
without storing the new level setting first, the
setting will be lost. (For details on how to store
settings, please refer to page 12.)
• While other parameters of patches from the preset
group cannot be altered, the patch level can be
changed and stored. This is useful for example to
match levels when combining user patches with
preset patches.
changed and stored. This is useful for example to
match levels when combining user patches with
preset patches.
Bypassing the Effects
You can temporarily turn off all effects in a patch. This is
useful for example to check the sonic character of a patch.
• In the Play mode, press the pedal whose LED is lit (the
pedal that was used to choose the current patch
number) once more.
number) once more.
All effects in the patch are now bypassed and the original
instrument sound is heard. In the bypass condition, the
LEDs of pedals 1 - 4 flash and the indication “bP” appears
alternately on the group and bank number display.
LEDs of pedals 1 - 4 flash and the indication “bP” appears
alternately on the group and bank number display.
Press the same pedal again, or select a different patch to
return to normal play mode.
return to normal play mode.
NOTE
NOTE
GROUP=PRESET
GROUP=USER
GROUP=BOTH
9