Garmin stylus nx125 Manual De Usuario

Start Here

 

 Lower the output tray, then open the extension.

 

 Flip the feeder guard forward.

 

 Squeeze the edge guide and slide it to the left.

 

 Load paper against the right edge guide and behind the 
tab, with the printable side face up.

 Do not open the ink cartridge package until you are ready to 

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all protective materials.

 

Connect the power cable.

 

 

 Do not connect to your computer yet.

 Press 

the

power button.

 

 Open the document cover, then open the ink cover.

 Don’t try to remove the ink cartridge guard or you may 

damage the printer.

 

 Shake the ink cartridges, then unpack them.

 

Remove only the yellow tape from each cartridge.

 

 

 Don’t remove any other seals from the cartridges.

 

 Insert the cyan ink cartridge, and press it down until it clicks.

 

 Press the

stop button. The cartridge holder moves.

 

 Repeat steps 4 and 5 for other cartridges.

 

 Close the ink cover, then close the document cover and 
press the

stop button again.

 

 Ink priming takes about 2 minutes. When the green power 
light stops blinking, priming is complete.

 

 

 Your printer ships with full cartridges and part of the ink 

from the first cartridges is used for priming the printer.

 

 

 Don’t turn off the printer while it is priming or you’ll 

waste ink.

 

 

 Open the paper support, then pull up the extension and tilt 
it back slightly.

Epson Stylus

®

 NX125/127 Series