Garmin Rino 130 Manual De Usuario

9

1.  Using the 

, highlight the ‘Channel’ or ‘Code’ field and then press the 

 IN to show a list of available channels/squelch codes.

2.  Move the 

 UP or DOWN to scroll through the selections.  Because not all the 

items fit in the window, a slider bar on the right side indicates your current position in the 
list.

3.  Once you have highlighted the desired selection, press the 

IN.

Scanning and Monitoring

The ‘Scan’ option allows you to scan through the available channels for voice activity.  As 

the unit scans and receives a signal (or if you transmit), it stops on that channel/squelch code 
for a few seconds, then continues scanning.  When the Rino 130 is scanning and it receives an 
incoming signal, the Rino 130 automatically decodes the Squelch Code used by the incoming 
signal.  The Rino 130 then uses that Squelch Code when it transmits back to that unit.  

You may use the Set Scanlist option to pick which channels/squelch codes to scan.  Scan-

ning through the all the channels can take time: Selecting only specific channels/squelch codes 
decreases the scan time and helps prevent the chances of missing a transmission.  The Scanlist 
also has Option Menu 

 choices to ‘Scan Current Codes’ or ‘Scan All Codes’.  Choosing ‘Scan 

Current Codes’ scans only the Channel and Squelch Code combination in memory.