ICOM IC-F610
1
1
PANEL DESCRIPTION
■ Front panel
qAF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
wLEFT UP/DOWN [∫
∫]/[√
√] KEYS
Push to select the talk group on the LTR or PassPort sys-
tem.
tem.
eFUNCTION DISPLAY
Displays a variety of information, such as an operating
channel text, talk group text.
NOTE: The above functions depend on pre-programming.
channel text, talk group text.
NOTE: The above functions depend on pre-programming.
rRIGHT UP/DOWN [
]/[
] KEYS
➥Push to select the operating system.
➥Push [
] key to send the most recently transmitted
DTMF code number during transmitting.
tDEALER-PROGRAMMABLE KEYS [P0] to [P4]
Desired functions can be programmed independently by
your dealer.
your dealer.
yPOWER SWITCH [POWER]
Push to turn the power ON and OFF.
• At power ON, a power-up alert tone sounds for about 1 sec. and
an opening message may appear. And the transceiver automati-
cally starts scanning if the scan function had been activated
before the power was turned OFF.
cally starts scanning if the scan function had been activated
before the power was turned OFF.
uMICROPHONE CONNECTOR
Connect the supplied microphone or optional DTMF micro-
phone.
phone.
NEVER connect non-specified microphones. The pin
assignments may be different and the transceiver may
be damaged.
assignments may be different and the transceiver may
be damaged.
D
D MICROPHONE
The supplied microphone has a PTT switch and a hanger
hook.
The supplied microphone has a PTT switch and a hanger
hook.
q
r
e
w
u
y
t
IC-F610_F620_F621-2.qxd 04.3.17 3:51 PM Page 1 (1,1)