ICOM ic-a4 ver02 Manual De Usuario

11

6

■ Initial set mode

Initial set mode is accessed at power ON and allows you to
set seldom-changed settings. In this way you can “customize”
transceiver operations to suit your preferences and operating
style.

D Entering initial set mode

q While pushing [V/M] + [

], turn power ON.

• The transceiver enters initial set mode and “mn”, “bP” or “St” ap-

pears on the display.

w Push[Y] or [Z] one or more times to select the desired

item as described below and at right.

e Push [

] to select the desired condition.

r Push [MW] or [PTT] to exit initial set mode and select the

previous operating mode.

D Memory names

This item allows you to display a
memory name instead of fre-
quency.
• When a memory channel has

not been programmed with a
name, frequency indication ap-
pears instead.

D Beep tones ON/OFF

Confirmation beep tones nor-
mally sound when you push a
key. These can be turned ON or
OFF as you prefer.

D Side tones ON/OFF

When using an optional headset
such as those from the David
Clark Co. via the adapter, the
transceiver outputs your trans-
mitted voice to the headset for
monitoring.

Optional

OPC-752 HEADSET

ADAPTER 

is required

.

■ Resetting the CPU

Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
➥While pushing [V/M] + [MW] + [SCAN], turn power ON to

reset the transceiver.

• “CLEAR” appears briefly to indicate the CPU has been reset.

IC-A4#02IM  01.12.5 5:04 PM  Page 11 (1,1)