GarrettCom 6K25 Manual De Usuario
Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)
31
www GarrettCom com
.
.
Fig 3.5.2d Daughter
Board shown upside down with two male latch connectors
Step 4. Hold the daughter board with both hands at the end and align the two cream
color latching
connectors (male)
placed at the bottom of
the daughter board with
the other female
connector placed on the
Granddaughter and
main board. As shown
below in Fig. 3.5.2e
Fig. 3.5.2e Magnum 6KPM daughter board aligned with the bottom
female connector for the installation
Step 5. Once the latching
connectors are aligned
properly and the mounting
holes are aligned with
stand offs then press
slowly and firmly with two
fingers (as shown below in
Fig. 3.5.2f) on the top of
the latching connectors
until the connectors
latched up securely.
Figure 3.5.2f: Securely latching up 6KPM Cards into a Magnum 6K25