OKI microline 8480fb Manual De Usuario

Microline 8480FB User’s Guide

Control Panel • 11

 

 

MODE.jpg  

SHIFT.jpg  

Memory Auto ALign Cross Ref

Select Align 1, Align 2, Align 3, or Align 4:
Press and hold the MODE switch, then press the 
SHIFT switch repeatedly to select Align 1, Align 2, 
Align 3, or Align 4 as the setting for Auto Align (see 
page 41).
• Auto Align (POW) [see page 42] must be set to 

SelectAutoALign (the default).

• The setting made using these switches is stored 

in Memory Auto Align (see page 47) unless it has 
been changed to Invalid.

Enter the Function Setting Menu:
Press both the MODE and the SHIFT switches 
simultaneously to place the printer in the Function 
Settings Menu mode.

 

 

SEL.jpg  

SHIFT.jpg  

Simultaneously press and hold the SHIFT and SEL 
switches to move continuous forms up to the tear 
off position (see page 61).
Note: Form Tear Off must be engaged. The 
factory default is Off.

 

 

SHIFT.jpg  

FF.jpg  

Press and hold SHIFT, then press FF repeatedly to 
move loaded paper (single sheets or continuous 
forms) forward 1/180-inch at a time.
If you press and  hold SHIFT, then press and hold 
LF, the paper will advance in rapid-fire 1/180-inch 
increments.

 

 

SHIFT.jpg  

LF.jpg   

Press and hold SHIFT, then press LF repeatedly to 
move loaded paper (single sheets or continuous 
forms) backward 1/180-inch at a time. Maximum 
allowed backward movement is 1/3-inch (8.5 mm).
If you press and  hold SHIFT, then press and hold 
LF, the paper will advance backward in rapid-fire 
1/180-inch increments.