ICOM ic-m87 Manual De Usuario

PANEL DESCRIPTION

Battery pack

Battery release button

ï BATTERY PACK RELEASE BUTTON
To release the battery pack:
Push the battery release button in the direction of the arrow
(

q) as shown below. The battery pack is then released.

To attach the battery pack:
Slide the battery pack on the back of the transceiver in the di-
rection of the arrow (

w), then lock it with the battery release

button.

*Slide the battery pack until the battery release button makes a ‘click’

sound.

CAUTION!: When pushing the battery release button,
slide the battery pack slightly in the direction of the arrow
(

w) to ease release. This will prevent possible injuring to

your fingers or nails

u CHANNEL UP/DOWN SWITCHES [Y]/[Z]

• Select an operating channel. (p. 9)
• Selects the SET mode condition of item. (p. 17)
• Checks tag channels or changes scanning direction dur-

ing scan. (p. 14)

• Sets and clears the displayed channel as a tag (scanned)

channel when pushed both switches for 1 sec.

• While turning power ON, clears all tag channels in the se-

lected channel group when both switches are pushed.

i DIAL/CHANNEL GROUP SWITCH [DIAL]

• Selects one of 3 regular channels in sequence when

pushed for 1 sec. (pgs. 8, 9, 16)

- International, USA (or ATIS*) and LAND (PMR) channels are

available. *German version only

• Push to return to the condition before selecting the chan-

nel when the priority channel or the call channel is se-
lected.

o SQUELCH SWITCH [SQL] (p. 11)

• Push this switch, then set the squelch level with [Y]/[Z].
• Manually opens the squelch for channel monitoring while

pushed and held.

• While pushing this switch, turn the power ON to enter the

set mode.

!0 PTT SWITCH [PTT]

Push and hold to transmit; release to receive.

IC-M87.qxd 02.11.28 10:56 AM Page 6 (1,1)