ICOM ps-125 Manual De Usuario
INSTRUCTIONS
DC POWER SUPPLY
PS-12 5
Thank you for purchasing the PS-125
DC
POWER SUPPLY
. The PS-125 is designed for
Icom equipments required 13.8 V DC/25 A
(Max.).
Please read these instructions thoroughly
before operating the PS-125.
(Max.).
Please read these instructions thoroughly
before operating the PS-125.
• RNEVER apply AC voltage that exceeds the
specified voltage for the PS-125 rear panel.
Excessive voltage could cause a fire or ruin
the power supply.
Excessive voltage could cause a fire or ruin
the power supply.
• RNEVER expose the power supply to rain,
snow or any liquids.
• RNEVER open the top or bottom covers.
There are no user adjustment points. Opening
the case may expose you to electric shock and
incorrect reassembly may cause a fire hazard.
the case may expose you to electric shock and
incorrect reassembly may cause a fire hazard.
• RNEVER let metal, wire or other objects touch
any internal components through the slits of
the cases. This will electric shock.
the cases. This will electric shock.
• RCAUTION! The socket-outlet must be near
the DC power supply and must be easily
accessible.
accessible.
• RACHTUNG! Die Steckdose muß nahe bei
diesem Gerät angebracht und zugängliich
sein.
sein.
• KEEP the power supply out of the reach of
children.
• USE the power supply with an Icom equipment
only. Other brands may have different pin
assignment.
assignment.
• USE an AC outlet that can supply more than
750 VA capacity. AVOID the use of a multi-plug
adaptor.
adaptor.
• DO NOT use strong cleaning agents such as
benzine or alcohol. ALWAYS unplug the AC
cable from the AC outlet, then use a dry soft
cloth when cleaning the power supply.
cable from the AC outlet, then use a dry soft
cloth when cleaning the power supply.
• DO NOT place liquids on or near the power
supply.
• DO NOT place the power supply against walls
or put anything to behind the power supply.
This will obstruct heat dissipation.
This will obstruct heat dissipation.
IMPORTANT!
The connected transceiver may receive switch-
ing noise from this power supply depending on
the antenna used and/or installing conditions,
etc.
The connected transceiver may receive switch-
ing noise from this power supply depending on
the antenna used and/or installing conditions,
etc.
SPECIFICATIONS
PRECAUTION
• Input voltage
: 230 V AC (50/60 Hz)
• Input current
: 2.3 A
• Output voltage
: 13.8 V DC±5%
• Max. output current
: 25 A, 50% duty (1 min. ON/1 min. OFF)
• Dimensions
: 111(W)
×94(H)×287(D) mm
(projections not included)
4.4(W)
×3.7 (H)×11.3(D) in
• Weight (approx.)
: 3.0 kg; 6 lb; 10 oz
• Usable temperature range
: –10˚C to +40˚C; +14˚F to +104˚F