Garmin 821P Manual De Usuario

■

Projection

Front:

 Projector is in front of the screen.

Front/Ceiling:

 Projector is in front of the screen, mounted 

upside-down from the ceiling.

Rear:

 Projector is behind the screen.

Rear/Ceiling:

 Projector is behind the screen, mounted 

upside-down from the ceiling.

■

Operation

Direct Power:

 When this feature is enabled, projection starts 

as soon as you plug in the power cord. You don’t have to 
press the P

Power

 button.

Sleep Mode:

 When this feature is enabled, the projector 

lamp automatically turns off when the projector has not 
received any input signals for 30 minutes. This conserves 
electricity, cools the projector, and extends the life of the 
lamp. To resume projecting, press the P

Power

 button.

■

Standby Mode

Set to 

Network ON

 to monitor your projector over a 

network and perform other network functions when the 
projector is in standby mode.

■

COM Port

Normally you don’t have to change this setting. Both 

USB

 

and 

RS-232C

 let you use the remote control as a wireless 

mouse. 

RS-232C

 is also used for ASCII control codes and to 

control the projector from a computer with the EMP 
Link 21L software, which can be downloaded from 

www.support.epson.com

. If you change the setting, turn 

the projector off and then on again to enable it.

■

Language

Select the language to be used for projector menus and 
messages.

4. When you’re finished, press 

Esc

 or 

Menu

.

Direct Power

is turned on, turn the 
projector off as you would 
normally. See page 41 for 
instructions.

Direct

 Power is