ICOM mr-1000t3 Manual De Usuario

BASIC OPERATION

■ Checking the installation

Before turning the power ON, be sure all the connec-
tions are complete. The checklist at right may be help-
ful for necessary confirmation.

D Checklist
q The 4 bolts securing the scanner unit must be firmly

tightened.

w Cabling must be securely attached to a mast or

mounting material, and must not interfere with the
rigging.

e Be sure waterproofing procedures are completed

on the system cable.

r The power connections to the battery must be of the

correct polarity.

t Be sure that the plugs at the rear of the display unit

have been connected correctly and securely.

(See p. 24 for details.)

CAUTION:

Connect the scanner unit before turning the

power ON. Otherwise the magnetron inside the scanner
unit might be damaged.

■ Turning power ON/OFF

q Push [POWER]/[

] to turn the power ON.

• The initial screen appears and warming up time is

counted down on the screen.

• The magnetron inside the scanner unit warms up for 90 sec.
• [POWER]/

[

]

does not function for 2 sec. after

the power is turned OFF.

w When the countdown is completed, the Standby

screen appears.

e Push [TX]/[

] to start scanning and select

the Plan Position Indicator (PPI) screen.

• Targets and heading marker appear.
• The screen appears approx. 2 sec. after turning the

power on, when ‘AUTO’ is selected in the “TUNE” of the
VIDEO menu.

r Push [POWER]/[

] to turn the power OFF.

(0.25)

T.V E C T 6 M

0.0 0 0 N M

C U R S

S O G 1 7 . 7 K T

H U P

0 0 0 . 0 ˚ T

H D G 2 5 3 . 4 ˚ T

E B L 1
E B L 2

MOB

V R M 1
V R M 2

C U R S 3 4 ˚ 3 7 . 7 2 N 1 3 5 ˚ 3 4 .4 2 E

S T B Y

COMPASS

GPS