ICOM mr-1000t3 Manual De Usuario
ii
FOREWORD
Thank you for purchasing Icom’s MR-1000RII/TII/TIII
MARINE RADAR.
MARINE RADAR.
The radar is designed especially for fishing boats. It
has powerful transmission power, 10 inch CRT display
and many other advanced features.
has powerful transmission power, 10 inch CRT display
and many other advanced features.
If you have any questions regarding the operation of
the radar, contact your nearest authorized Icom Inc.
dealer.
the radar, contact your nearest authorized Icom Inc.
dealer.
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before attempting to operate the marine radar.
SAVE THIS INSTRUCTION MANUAL.
This
manual contains important safety and operating in-
structions for the MR-1000RII/TII/TIII.
structions for the MR-1000RII/TII/TIII.
EXPLICIT DEFINITIONS
The following explicit definitions apply to this instruc-
tion manual.
tion manual.
PRECAUTION
RNEVER
let metal, wire or other objects touch any
internal part of the radar.
RNEVER
place the radar within the reach of chil-
dren.
RNEVER
expose the display unit to rain, salt water
or any other liquids.
NEVER
connect the radar to AC or more than 42 V
DC. This will damage the radar.
AVOID using the radar near any magnetic materials,
such as a loudspeaker or a large power transformer,
as this can cause distortion of the CRT display.
such as a loudspeaker or a large power transformer,
as this can cause distortion of the CRT display.
AVOID placing the display unit in excessively dusty en-
vironments.
vironments.
AVOID placing the display unit near heating equipment
or in direct sunlight or where hot or cold air blows di-
rectly onto it.
or in direct sunlight or where hot or cold air blows di-
rectly onto it.
AVOID using the scanner unit in areas where the tem-
perature is below –25˚C (–13˚F) or above +70˚C
(+158˚F). AVOID using the display unit in areas where
the temperature is below –15˚C (+5˚F) or above +55˚C
(+131˚F).
perature is below –25˚C (–13˚F) or above +70˚C
(+158˚F). AVOID using the display unit in areas where
the temperature is below –15˚C (+5˚F) or above +55˚C
(+131˚F).
AVOID using strong solvents such as benzene or al-
cohol for cleaning the radar, as they may damage the
surfaces.
cohol for cleaning the radar, as they may damage the
surfaces.
BE CAREFUL!
SART signal may not be detected and may
not be displayed on the screen depending
on the SEA, RAIN or IR settings.
not be displayed on the screen depending
on the SEA, RAIN or IR settings.
Follow the settings as below to detect the
SART signal on the screen.
SART signal on the screen.
q Select the screen range between 6 NM
to 12 NM with [+/–]. (p. 2)
w Set the [GAIN] as high as possible. (p. 3)
e Set the [SEA] to minimum. (p. 3)
r Set the [RAIN] to minimum. (p. 3)
t Turn the [IR] OFF.
y Turn the [STRETCH] OFF.
e Set the [SEA] to minimum. (p. 3)
r Set the [RAIN] to minimum. (p. 3)
t Turn the [IR] OFF.
y Turn the [STRETCH] OFF.
WORD
R WARNING
CAUTION
NOTE
DEFINITION
Personal injury, fire hazard or electric
shock may occur.
shock may occur.
Equipment damage may occur.
If disregarded, inconvenience only.
No risk of personal injury, fire or
electric shock.
No risk of personal injury, fire or
electric shock.