ICOM ic-fr4100 Manual De Usuario
2
1
PANEL DESCRIPTION
!6
ANI CLEAR SWITCH [ANI CLR]
Push for 1 sec. to clear the received ANI ID indica-
tion on the display and return to the original indica-
tion.
tion on the display and return to the original indica-
tion.
NOTE:
This switches’ function is not available for
some versions.
!7
DEALER-PROGRAMMABLE SWITCH [PROG]
Toggles the pre-programmed function ON or OFF
when pushed.
when pushed.
!8
PROGRAMMED FUNCTION INDICATOR
Lights green while the pre-programmed function is
activated.
activated.
!9
DC INDICATOR
Lights green during DC operation.
D
D
Function display
q
MEMORY CHANNEL INDICATOR
Shows the selected memory channel.
w
TRANSMIT POWER INDICATOR
Shows the output power level.
e
AUDIBLE INDICATOR
“@” appears during audible condition, disappears
during inaudible condition. (During audible condi-
tion, the audio mute is cancelled.)
during inaudible condition. (During audible condi-
tion, the audio mute is cancelled.)
r
ALPHANUMERIC INDICATORS
Shows a variety of text or code information.
32
H
H@
H
ICOM
H
INC.
q
w e
r
■
Rear panel
q
TRANSMIT ANTENNA CONNECTOR [TX/TX•RX]
➥Connects a transmit antenna (impedance: 50 Ω)
and outputs transmit signals.
➥When installing an optional internal duplexer
(supplied by a third party), this connects the
transmit/receive to an antenna.
transmit/receive to an antenna.
w
EXTERNAL SPEAKER CONNECTOR [EXT SP]
Accepts a 4 Ω external speaker.
e
REMOTE CONNECTOR [REMOTE]
Connects to the remote controller.
• See p. 3 for remote connector information.
r
ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pgs. 3, 4 for accessory connector information.
t
RECEIVE ANTENNA CONNECTOR [RX]
➥Connects a receive antenna (impedance: 50 Ω)
and inputs received signals.
➥When installing an internal duplexer (supplied by
third party), do not use this connector.
y
AC POWER SOCKET [AC]
Connects the supplied AC power cable to a domes-
tic AC outlet.
tic AC outlet.
u
GROUND TERMINAL [GND]
Ground the repeater through this terminal to prevent
electric shocks, TVI, BCI and other problems.
electric shocks, TVI, BCI and other problems.
i
DC POWER INPUT TERMINALS [BATTERY]
Connects the 12 V storage battery for the repeater
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
backup when the AC power is interrupted. These
terminals are also used for DC power operation.
CAUTION: NEVER
short the (+) line of the DC
power cable to the repeater’s chassis when con-
necting a DC power cable to the [BATTERY] termi-
nals. Otherwise there is danger of electric shock
and/or equipment damage.
necting a DC power cable to the [BATTERY] termi-
nals. Otherwise there is danger of electric shock
and/or equipment damage.
TX/TX•RX
EXT SP
REMOTE
ACC
RX
GND
AC
BATTERY
q
e
r
t
y
u
i
w