Garmin 74C Manual De Usuario
76
Solving Problems
Nothing appears on the external monitor.
■
Make sure the VGA computer cable is connected to your
computer’s video port and the projector’s
computer’s video port and the projector’s
Computer1/Component Video1
port. It will not work if you
connected the computer cable to the projector’s
Computer2/Component Video2
port.
■
Make sure the cable from your monitor is connected to the
projector’s
projector’s
Monitor Out
port.
You see a blue screen with the message
No Signal
displayed.
■
Make sure the cables are connected correctly, as described in
Chapter 1.
Chapter 1.
■
Make sure the power to your computer or video source is turned
on.
on.
■
If you’ve connected a computer and one or more video sources,
you may need to press the
you may need to press the
Source
button (on the projector) or
the
Computer1/2
or
S-Video/Video
button (on the remote
control) to select the correct source. Allow a few seconds for the
projector to sync up after pressing the button.
projector to sync up after pressing the button.
■
If you’ve connected a laptop computer, make sure it’s set to
display on an external monitor. See page 31.
display on an external monitor. See page 31.
If you’re using a PC laptop:
■
Hold down the
Fn
key and press the function key that lets you
display on an external monitor. It may have an icon such as
, or it may be labelled
CRT/LCD
. Allow a few seconds for
the projector to sync up after pressing it. Check your laptop’s
manual or online help for details.
manual or online help for details.
On most systems, the
or
CRT/LCD
key lets you toggle
between the LCD screen and the projector, or display on both at
the same time.
the same time.