OKI b 4400 Manual De Usuario

B4400/4500/4550/4600 User’s Guide

24

This chapter describes the function of the operator panels. It 

is useful to describe the Status Monitor software at this point 

as it provides the B4400 with status information and the 

equivalent of the menu control panel on the B4500, B4550 and 

B4600. (See “Printer Drivers” for installation of the Status 

Monitor.)

NOTE:  The easiest way to check the status of the B4400 is to 

use the online Status Monitor. We’ll tell you more about the 

Status Monitor on page 26.

The B4400 operator panel consists of 4 LED indicators and an 

OnLine button. From left to right, the LEDs indicate Power On, 

Ready, Manual feed and Error.

    

4400_panel.jpg

  

The LED indicators show the status of the printer and have five 

operating conditions as follows:

• Indicator off
• Indicator on
• Flash 1 - slow blink - 1 long flash every 4 seconds
• Flash 2 - blink - 1 flash per second
• Flash 3 - rapid blink - 4 flashes per second.

All four LED indicators come on momentarily when power is 

turned on. 
Power on LED (green)
This indicator comes on and stays on when the printer is 

turned on.