ONKYO dr-s501 Manual De Usuario
14
Front & Rear Panels—Continued
SPEAKERS [18]
These terminal posts are for connecting your front
speakers.
These terminal posts are for connecting your front
speakers.
HDMI IN/OUT [27]
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI input is for connecting components with
HDMI outputs. The HDMI output is for connecting
a TV or projector with an HDMI input.
HDMI (High Definition Multimedia Interface) con-
nections carry digital audio and digital video.
The HDMI input is for connecting components with
HDMI outputs. The HDMI output is for connecting
a TV or projector with an HDMI input.
COMPONENT VIDEO OUTPUT [24]
These jacks output component video and can be
connected to an component video input on a TV or
projector.
These jacks output component video and can be
connected to an component video input on a TV or
projector.
VIDEO OUTPUT [23]
This RCA connector can be used to connect a TV or
projector with a composite video input.
This RCA connector can be used to connect a TV or
projector with a composite video input.
FM ANTENNA [19]
This jack is for connecting an FM antenna.
This jack is for connecting an FM antenna.
AM ANTENNA [19]
These push terminals are for connecting an AM
antenna.
These push terminals are for connecting an AM
antenna.
AV CONNECTOR (European model only) [24]
This SCART output can be connected to a TV or
projector with a SCART input. This SCART con-
nector outputs 2-channel stereo audio, composite
video, and RGB video.
This SCART output can be connected to a TV or
projector with a SCART input. This SCART con-
nector outputs 2-channel stereo audio, composite
video, and RGB video.
SPEAKER IMPEDANCE SELECTOR [18]
This selector is used to select impedances of your
speakers.
If the impedance of any of front speakers is 4 ohms
or more but less than 6, set the speaker impedance
to “4
This selector is used to select impedances of your
speakers.
If the impedance of any of front speakers is 4 ohms
or more but less than 6, set the speaker impedance
to “4
:
~16
:
”.
OPTICAL DIGITAL AUDIO IN [26]
This optical digital audio input can be connected to
an optical digital audio output on a DVD recorder,
or game console.
This input is assigned for VIDEO 1 INPUT in
default.
This optical digital audio input can be connected to
an optical digital audio output on a DVD recorder,
or game console.
This input is assigned for VIDEO 1 INPUT in
default.
If you output audio from this input during
VIDEO 2/DOCK INPUT is selected, you must
change the “Video2 Input” setting to “OPT” from
“Coax” (page 55).
VIDEO 2/DOCK INPUT is selected, you must
change the “Video2 Input” setting to “OPT” from
“Coax” (page 55).
(1
COAXIAL DIGITAL AUDIO IN [26]
This coaxial digital audio input can be connected to
a coaxial digital audio output on a DVD recorder or
game console.
This input is assigned for VIDEO 2/DOCK INPUT
in default.
If you output audio from this input during VIDEO 1
INPUT is selected, you must change the “Video1
Input” setting to “Coax” from “OPT” (page 55).
This coaxial digital audio input can be connected to
a coaxial digital audio output on a DVD recorder or
game console.
This input is assigned for VIDEO 2/DOCK INPUT
in default.
If you output audio from this input during VIDEO 1
INPUT is selected, you must change the “Video1
Input” setting to “Coax” from “OPT” (page 55).
(2
REMOTE CONTROL [26]
This
(Remote Interactive) jack can be con-
nected to an
jack on Onkyo RI Dock. The DVD
receiver remote controller can then be used to con-
trol the RI Dock. To use
trol the RI Dock. To use
, you must make an
analog audio connection (RCA) between the DVD
receiver and the RI Dock, even if they are connected
digitally.
receiver and the RI Dock, even if they are connected
digitally.
(3
VIDEO 1 INPUT [25]
Here you can connect other video equipment. Input
jacks include composite video and analog audio
input.
Here you can connect other video equipment. Input
jacks include composite video and analog audio
input.
(4
VIDEO 2/DOCK INPUT [26]
Here you can connect Onkyo RI DOCK or other
video equipment. Input jacks include composite
video and analog audio input.
Here you can connect Onkyo RI DOCK or other
video equipment. Input jacks include composite
video and analog audio input.
(5
SUBWOOFER PRE OUT [18]
A powered subwoofer can be connected here.
A powered subwoofer can be connected here.
(6
AC INLET [28]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel
(4
(6
(1 (2 (3 (5