ONKYO dr-s501 Manual De Usuario
24
Connecting the DVD receiver—Continued
• Connect the DVD receiver directly to your TV. If you
connect the DVD receiver through a VCR, TV/VCR
combination, or video selector, the picture may be dis-
torted because DVD-Video discs are usually copy pro-
tected.
combination, or video selector, the picture may be dis-
torted because DVD-Video discs are usually copy pro-
tected.
Using Component Video
You can use the component video output instead of the
standard video out jack to connect this receiver to your
TV (or other equipment).
This will provide better quality picture than composite
video.
This jack cannot output the signal from composite
video input.
• Use a component video cable (not supplied) to con-
standard video out jack to connect this receiver to your
TV (or other equipment).
This will provide better quality picture than composite
video.
This jack cannot output the signal from composite
video input.
• Use a component video cable (not supplied) to con-
nect the COMPONENT VIDEO OUTPUT jacks to a
component video input on your TV (or monitor).
component video input on your TV (or monitor).
If you connect the component video output to a TV or
another component that doesn’t support progressive
scanning, be sure to turn off HDMI (see page 30).
You can set the component video output to Progressive
or Interlaced (see page 30).
another component that doesn’t support progressive
scanning, be sure to turn off HDMI (see page 30).
You can set the component video output to Progressive
or Interlaced (see page 30).
Compatibility of this unit with progressive-scan TVs.
This receiver is compatible with progressive video
Macro Vision System Copy Guard.
This receiver is compatible with progressive video
Macro Vision System Copy Guard.
Using SCART (European model only)
If your TV has a SCART-type AV input, you can use a
SCART cable to connect this receiver to your TV. This
type of connection carries both the sound and the picture.
• Use a SCART cable (not supplied) to connect the AV
SCART cable to connect this receiver to your TV. This
type of connection carries both the sound and the picture.
• Use a SCART cable (not supplied) to connect the AV
CONNECTOR to an AV input on your TV.
This connector can output composite video, or RGB
video. The default setting is composite, which should
work with all TVs. Consult the manual that came with
your TV to see if you can use one of the higher quality
settings. See page 62 for how to change the video output.
video. The default setting is composite, which should
work with all TVs. Consult the manual that came with
your TV to see if you can use one of the higher quality
settings. See page 62 for how to change the video output.
Connecting Your TV
(video connection)
(video connection)
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DIS-
PLAYED IN THE PICTURE. IN CASE OF 525 OR
625 PROGRESSIVE SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE “STAN-
DARD DEFINITION” OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COM-
PATIBILITY WITH THIS MODEL 525p AND 625p
DVD RECEIVER, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DIS-
PLAYED IN THE PICTURE. IN CASE OF 525 OR
625 PROGRESSIVE SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE “STAN-
DARD DEFINITION” OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COM-
PATIBILITY WITH THIS MODEL 525p AND 625p
DVD RECEIVER, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
Y
P
B
P
R
COMPONENT
VIDEO IN
VIDEO IN
TV
SCART
TV