Hitachi 22ld4550c Manual De Usuario
24
English
Connecting with a HDMI to DVI cable
Connect the DVI output of the PC to the
HDMI IN 1(DVI) jack on the TV.
HDMI IN 1(DVI) jack on the TV.
Connect the PC audio output to the
AUDIO IN (RGB/DVI) jack on the TV.
AUDIO IN (RGB/DVI) jack on the TV.
Turn on the PC and the TV.
Select HDMI1 input source using the
INPUT button on the remote control.
INPUT button on the remote control.
NOTE
To enjoy vivid picture and sound, connect a
PC to the TV.
Avoid keeping a fixed image on the TV’s
screen for prolonged periods of time. The
fixed image may become permanently
imprinted on the screen; use a screen saver
when possible.
when possible.
Connect the PC to the RGB (PC) or HDMI
IN (or HDMI/DVI IN) port of the TV; change
the resolution.
the resolution.
There may be interference relating to
resolution, vertical pattern, contrast or
brightness in PC mode. Change the PC
mode to another resolution or change
the refresh rate to another rate or until
the picture is clear. If the refresh rate of
the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
brightness in PC mode. Change the PC
mode to another resolution or change
the refresh rate to another rate or until
the picture is clear. If the refresh rate of
the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
The synchronization input waveform for
Horizontal and Vertical frequencies are
separate.
separate.
Connect the signal cable from the monitor
output port of the PC to the RGB (PC) port
of the TV or the signal cable from the HDMI
output port of the PC to the HDMI IN (or
HDMI/DVI IN) port on the TV.
of the TV or the signal cable from the HDMI
output port of the PC to the HDMI IN (or
HDMI/DVI IN) port on the TV.
Connect the audio cable from the PC to the
Audio input on the TV. (Audio cables are not
included with the TV).
included with the TV).
If using a sound card, adjust PC sound as
required.
This TV uses a VESA Plug and Play
Solution. The TV provides EDID data to the
PC system with a DDC protocol. The PC
adjusts automatically when using this TV.
PC system with a DDC protocol. The PC
adjusts automatically when using this TV.
DDC protocol is preset for RGB (Analog
RGB), HDMI (Digital RGB) mode.
If required, adjust the settings for Plug and
Play functionality.
If the graphic card on the PC does not output
analogue and digital RGB simultaneously,
connect only one of either RGB or HDMI IN
(or HDMI/DVI IN) to display the PC output on
the TV.
(or HDMI/DVI IN) to display the PC output on
the TV.
If the graphic card on the PC does output
analogue and digital RGB simultaneously,
switch the TV to either RGB or HDMI;
(the other mode is set to Plug and Play
automatically by the TV.)
(the other mode is set to Plug and Play
automatically by the TV.)
DOS mode may not work depending on the
video card if you use a HDMI to DVI cable.
For best picture quality, using an RGB-PC
cable under 5m is recommended.
AUDIO IN
(RGB/DVI)
HDMI IN 1
(DVI)