OKI ML6300FB Manual De Usuario
Paper handling > 25
2.
Check the position of the tear-off perforations (1) relative
to the paper cutter (2). (Paper Tray (3) is shown for
clarity.)
to the paper cutter (2). (Paper Tray (3) is shown for
clarity.)
(a)
To advance the forms, hold down the TEAR button
and press the FF/LOAD button.
and press the FF/LOAD button.
(b)
To retract the forms, hold down the TEAR button and
press the LF button.
press the LF button.
NOTE
If a movement greater than +- 7/90 in is specified, the QUIET
indicator blinks and the above adjustment cannot be made.
If a movement greater than +- 7/90 in is specified, the QUIET
indicator blinks and the above adjustment cannot be made.
3.
Release the buttons after the tear-off perforations have
been aligned with the paper cutter.
been aligned with the paper cutter.
R
EMOVING
CONTINUOUS
FORMS
1.
Tear off the continuous forms.
2.
Press the SEL button to set the printer off-line and
reposition the continuous forms in the printer.
reposition the continuous forms in the printer.
3.
Press the PARK button to move the front edge of the
continuous forms backwards to the Pin Tractors.
continuous forms backwards to the Pin Tractors.
NOTE
The ALARM indicator illuminates to indicate there is no paper
present.
The ALARM indicator illuminates to indicate there is no paper
present.
If sprocket holes of the last page of the forms disengage from
the sprocket pins, do not attempt to eject the paper to avoid
the possibility of a paper jam.
the sprocket pins, do not attempt to eject the paper to avoid
the possibility of a paper jam.
1
2
3