Hitachi 15ld2200 Manual De Usuario

- 20 -

To Display The Time

While watching a TV programme with Tele-

text transmission press the

button.

The current time information, captured from

Teletext will be displayed on the screen.

If the programme being watched does not

have Teletext transmission, no information

will be displayed.

Time information is displayed on the screen

for 10 seconds. If you want to cancel the dis-
play, press the "

" button.

Connect Peripheral

Equipment

There is a wide range of audio and video

equipment that can be connected to your TV.
The following connection diagrams show

you where the different (optional) equipment

should be connected at the rear side of the

TV.

PC Sound Connection

Connect the audio output (line out) of your

PC to the audio inputs of your TV (see E and

F on the next page) with a stereo sound

cable.

Via The SCART

Your TV has one Scart socket. If you want to

connect peripherals (e.g. video, decoder,

etc.) which have Scarts to the TV, use Scart

input.
If an external device is connected via the

Scart socket, the TV will be switched to AV

mode automatically. If the external device is

connected to SCART input and the signal is
RGB1, select RGB1 by pressing the

button.

Via Aerial Input

If you want to connect to your TV, peripherals

like video recorders or decoders, but the de-

vice you want to connect does not have

Scart, you should connect it to the Aerial in-

put of the TV.
If the VCR is connected via aerial input it is

suggested that you use Programme 0.

Decoder

Cable TV offers you a wide choice of pro-

grams. Most of them are free, others are to

be paid for by the viewer. This means that

you will need to subscribe to the broadcast-

ing organisation whose programmes you

wish to receive. This organisation will supply

you a corresponding decoder unit to allow

the programmes to be unscrambled.
For further information ask your dealer. See

also the booklet supplied with your decoder.
Connect a decoder with an aerial socket

to the TV
Connect the aerial cable.
Connect a decoder without an aerial

socket to the TV
Connect the decoder to the TV with a SCART

lead to SCART input.

TV And Video Recorder

Connect the aerial cables.
Better picture quality can be obtained if you

also connect a SCART lead to SCART

socket.

Playback NTSC

To use this option you can;
Connect an NTSC VCR player to Scart at the

rear side of the TV.

Connect an NTSC VCR player to RCA Jacks

at the rear side of the TV.

Then, press the

button to select proper

source.

(1*/,6+8.LQFK3L[HO:RUNV0%6$0:0S