OKI microline 721 Manual De Usuario

Your printer has provision for single-sheet paper feed from the top and for continu-
ous-form paper feed from the rear. You can also install options: the Cut Sheet Feeder,
which holds a stack of 100 sheets for feeding from the top and the Push and/or Pull
Tractors for feeding continuous-form labels, heavy card stock or multi-part forms from
the bottom. See Chapter 5 for more information on these options.

• Single sheets (basis weight 14 to 24 lbs)

• Single envelopes

– 24-lb maximum
– 6.5” to 9.5” wide

• Transparencies (8.5 x 11”)

• Single-part continuous forms

– 12 to 24 lb.
– Minimum 3” wide (*

1

)

• Carbonless, multi-part forms

– Original, plus 4 copies
– 9 to 11 lb
– Minimum 3” wide (*

1

)

• Interleaf, multi-part forms (with carbon paper)

– Original, plus 4 copies
– 10 to 12 lb paper, with 9 lb carbon
– Minimum 3” wide (*

1

)

 (*

1

) Please  change  mentioned  below  centering  Position  within  a  set-up  group  fol-

lowing indication of 32 pages when a form of 3” wide is used by Rear Feed.
In the case of ML720 “Mode 1”.
In the case of ML721 “Mode 2”.