Microboards Technology gx-1 Manual De Usuario
• The GX-1 Disc Publisher and Zulu2
18
You will see an entry labeled
“USB Serial Port (COMx)” entry
for each GX-1 Disc Publisher you
have installed. The COMx will
be the COM port number to be
entered into the Configure
screen.
“USB Serial Port (COMx)” entry
for each GX-1 Disc Publisher you
have installed. The COMx will
be the COM port number to be
entered into the Configure
screen.
Select the COM port as found on
the Computer Management
screen.
the Computer Management
screen.
Next, select the recorder.
Finally, select the Printer.
To confirm you have made the correct selection, you
can click on the T box next to each item, as follows:
can click on the T box next to each item, as follows:
• When
the
T is pressed for the COM Port, the
disc flippers will move up and down.
• When
the
T is pressed for the recorder, the
tray will open and then close.
• When
the
T is pressed for the Printer, the
belts will move in reverse.
• Once you have completed your selections,
check the Don’t show this window again
box to bypass this step when launching
Zulu2 again. You will be able to reset this
option should it be necessary to configure the
system again.
box to bypass this step when launching
Zulu2 again. You will be able to reset this
option should it be necessary to configure the
system again.
Click the OK button.
The system will now initialize the GX-1 Disc Publisher. The belts will be cleared of any discs and any
discs in the recorders will be removed and rejected.
discs in the recorders will be removed and rejected.
Once initialization is complete, the system is ready for use.
Please see the Zulu2 for Microboards Disc Publishers manual for more information on using Zulu2.