Cisco Systems SOHO 97 Manual De Usuario

Perform the following steps to connect the PC to Ethernet port 4 (or to port 1, 2, 
or 3) on the router:

Connect one end of the yellow Ethernet cable to Ethernet port 4 on the router.

Connect the other end of the yellow Ethernet cable to the RJ-45 port on the NIC 
of the PC, server, or workstation.

Leave the PCs that you connect to the router turned off until after you complete 
router installation.

You can connect additional servers, PCs, or workstations to Ethernet ports 1, 2, 
and 3.

To verify the connection, check that the Ethernet 1 LED is on after you complete 
the router installation. 

The procedure for connecting an ADSL line depends on the router and, in some 
cases, on the location. 

shows how to connect the ADSL line to a cable 

wall jack. Follow the steps given after 

 to connect the ADSL line to a 

cable wall jack. (

depicts a Cisco 837 router, but it also applies to the 

SOHO 97 router. The connection procedure applies to both the Cisco 837 router 
and the SOHO 97 router.)