Cisco Systems SOHO 97 Manual De Usuario

Perform the following steps to connect the Cisco 837 router’s console port to an 
async modem: 

Connect the RJ-45 end of the SOHO/800 Series Router Modem Cable to the 
Cisco 837 router’s console port.

Connect the DB-25 connector at the other end of the SOHO/800 Series Router 
Modem Cable to an available port on the async modem.

Connect one end of the RJ-11 cable to the wall jack.

Connect the other end of the RJ-11 cable to the telephone line.

Use the LEDs on the front of the router to check the links between the router and 
any attached Ethernet devices or telephones. See 

 to verify 

the link status of devices attached to Cisco 837 and SOHO 97 routers.

When you finish installing the router, you must configure the router software. 
First, check the PC configurations to ensure that all the connected PCs will be able 
to communicate with the router. Then configure the router software, using the web 
interface.

Each PC that is connected to the router must be configured to use TCP/IP and to 
obtain its IP address automatically. Follow these steps to configure each PC that 
is running Microsoft Windows NT or Microsoft Windows 95 or 98. If the PC is 
running a different version of Microsoft Windows, refer to the documentation that 
came with the PC.

Start the PC, and open the Control Panel.